TECMAR

WANGTEK 5525ES (VER. 2)

Device Type            Internal Tape Drive
Interface              SCSI, SCSI-2
Format                 QIC-24(read-only)

                       QIC-120, QIC-150, QIC-525 (write)
Sustained Transfer     200 Kbps
Rate
Size                   5.25 in. half height
View                   Bottom


                        USER CONFIGURABLE SETTINGS

                Setting                    Label           Position

  »   Parity check disabled                JP1/D             Open

      Parity check enabled                 JP1/D            Closed

  »   SCSI 2 mode enable                   JP2/1            Closed

      SCSI 1 mode enabled                  JP2/1             Open

  »   Factory configured - do not         JP2/2-8        Unidentified
      alter

                DRIVE SELECT ID

  Drive ID     JP1/A       JP1/B      JP1/C

     0         Open        Open        Open

     1        Closed       Open        Open

     2         Open       Closed       Open

     3        Closed      Closed       Open

     4         Open        Open       Closed

     5        Closed       Open       Closed

     6         Open       Closed      Closed

     7        Closed      Closed      Closed

                        TERMINATION POWER SELECTION

                 Setting                                F1

  »   TERMPWR supplied by drive              1.5 ampere fuse installed

      TERMPWR supplied by SCSI             1.5 ampere fuse not installed
      interface to drive

                       DIAGNOSTIC LED(S)

  Note: Function and location of LED(s) is/are unidentified.

                       MISCELLANEOUS TECHNICAL NOTES

  Termination is enabled or disabled via the three terminating resistors
  (see diagram).

  MANUFACTURER’S RECOMMENDED MEDIA

   Media        Mode      Capacity

  DC-600A     QIC-120       125MB

  DC-6150     QIC-150       150MB

  DC-6250     QIC-150       250MB

  DC-6320     QIC-525       320MB

  DC-6525     QIC-525       320MB